|
|
|
CUBLOC Start Kit - 290
|
U03004
|
Part No. U03004
We are offering this Starter's kit for 1st time users of CUBLOC.
Includes: CB290
CB290 Proto-Board
RS232 Serial Cable
DC JACK
User's Manual
|
Detailed Description
The CB290 Start Kit is recommended for 1st timer users of CUBLOC who need the maximum number of digital inputs/outputs.
- The CB290 Start Kit comes with a proto board which has a prototyping area for the user to solder peripherals and test before going into production with industrial boards such as the CuBASE 64M.
- Start Kit consists of : CUBLOC core module CB290 + CB290 Proto-Board + RS232 serial cable + DC Jack + User's Manual
(A power supply is NOT included with this kit)
(Required Power: 9~30V DC power supply w/ > 200mA)
[CB290]
- Ideal for apps requiring large number of I/O ports.
- Ideal for apps requiring RTC (Real Time Clock) and data memory back-up during power-down.Ideal for apps requiring large data memory. (e.g. Modbus RTU Master mode)
- Ideal for small to mass production (1 to 1000+), Embeddable in customized PCB
- MODBUS ASCII (Master & Slave Mode) Support
- MODBUS RTU (Master & Slave Mode) Support
- External Peripherals CuNET (I2C) included.
- External Peripherals SPI included.
- Develop using CublocStudio in BASIC and/or Ladder Logic Language.
|
Processor
|
CUBLOC CB290
|
|
Microprocessor
|
Atmega128 @ 18.432Mhz
|
|
Program Memory (Flash)
|
80KB
|
|
Data Memory (RAM)
|
24KB(BASIC) + 4KB(Ladder Logic)
|
|
EEPROM
|
4KB EEPROM
|
|
Program Speed
|
36,000/sec
|
|
General Purpose I/O
|
91 I/O lines (5V TTL)
(33 input only + 32 output only + 26 input/output configurable)
|
|
Serial Ports for Communication
|
- 2 High-speed hardware-independent serial ports
- Configurable Baud rates: 2400bps to 230,400 bps
|
|
Analog Inputs
|
8 channel 10-bit ADCs
|
|
Analog Outputs
|
- 6 Channel 16-bit PWMs (DACs)
- Configurable Frequency: 35hz to 1.5Mhz
|
|
External Interrupts
|
4 Channels
|
|
High Speed Counters
|
2 Channel 16-bit Counters (up to 2Mhz)
|
|
Power
|
5V, 70mA (ports unloaded)
|
|
RTC (Real Time Clock)
|
Yes
|
|
Timers
|
- 1 User Configurable Timer
- Configurable Interval Units = 10ms
|
|
Data Memory Back-up
|
Yes, a rechargable Super-Capacitor or Battery may be connected.
(The *CB290 Proto-Board and **CuBASE64M comes with Super-Capacitor included on-board)
|
|
Operating Temperature
|
-40 °C to 120 °C
|
|
Package
|
108-pin Module
|
|
Size
|
2.4"L x 1.9"W x 0.5"H (59.4 x 47.8 x 13 mm)
|
* The 0.1F super-capacitor on the CB290 Proto-Board will back up the data memory of the CB290 module for a period of approximately 24 hours during power-down.
** The 1.0F super-capacitor on the CuBASE64M will back up the data memory of the CB290 module for a period of approximately 10 days during power-down.
For longer duration of backup period, please use a battery or a super-capacitor with larger capacity (e.g. A 10F super-capacitor will last you ~100 days or 3 months, a battery can extend this period to 1 to 10 years depending on the capacity of the battery used)
|
|
|